Difference between revisions of "CA"
Jump to navigation
Jump to search
Astropoint (talk | contribs) (New page: Run "DC++" on your computer and then open "CA Personal Firewall". You will need to allow <ol> <li>"DCPlusPlus.exe" by right-clicking on it and selecting “Allow”.<br> http://www.twofo....) |
Astropoint (talk | contribs) m |
||
Line 36: | Line 36: | ||
<li>Follow steps 3 and 4 as above and the second range should start at "137. | <li>Follow steps 3 and 4 as above and the second range should start at "137.206.0.0" and end at "255.255.255.255"<br> | ||
http://www.twofo.co.uk/resources/CA-images/8.JPG<br> | http://www.twofo.co.uk/resources/CA-images/8.JPG<br> | ||
</li> | </li> |
Latest revision as of 23:39, 31 May 2010
Run "DC++" on your computer and then open "CA Personal Firewall". You will need to allow
- "DCPlusPlus.exe" by right-clicking on it and selecting “Allow”.
- Select "DCPlusPlus.exe" and click on "Edit".
- Step 1: Name and Enable the rule. Set Protocol & Port as "Specify Directly", Access as "Prevent", Protocol as "TCP and UDP" and Direction as "In/Out".
- Step 2: Nothing modified in "My Computer" tab.
- Step 3: Under Remote Computer select IP Address as "Specify Directly" and the first range should start at "1.0.0.0" and end at “127.0.0.0"
- Step 4:No changes under Restrictions, and click OK.
- Follow steps 3 and 4 as above and the second range should start at "127.0.0.2" and end at "137.205.0.0"
- Follow steps 3 and 4 as above and the second range should start at "137.206.0.0" and end at "255.255.255.255"
- Finally, add one more rule to allow connections to other people on Resnet as below.
Finally, you must restart the CA Security centre before any of these rules actually take effect.